Corporate
SOLUTIONS BY SECTOR
AIR PLATFORM POWER SOLUTIONS
There Is No Margin for Error in the Sky.
A mission aircraft flying at high altitudes operates in an atmosphere where temperature extremes, reduced pressure, and intense electromagnetic activity prevail. In this environment, the radar system’s accurate performance, uninterrupted imaging from electro-optical cameras, and real-time flight computer calculations all depend on a flawless power infrastructure.
VERTE ELECTRONICS
Avionics Power Conversion Units
Our company’s solutions tailored for air platforms are specially designed to withstand the low pressure, sudden temperature changes, and electromagnetic interference risks associated with high altitudes.
AVIONIC POWER CONVERSION UNITS
Our solutions, compatible with avionics systems, deliver critical mission loads while offering minimum weight and maximum reliability. From radar systems to electro-optical cameras, and flight control computers to communication infrastructures, our power electronics solutions lie at the heart of all these systems.
VPX Avionic Power Supply
VPX-6U-115-28-1000-A01
VPX-6U-115-28-1000-A01 is a rugged military power supply that complies with VITA 62 and operates with a 3-phase 115 VAC or…
Type
VPX
Input Voltage
100~130 VAC L-N
Output Current
36 A
Output Power
1000 W
We offer converters fully compliant with the MIL-STD-704 standard, capable of operating with 115 VAC / 400 Hz and 28 VDC power systems.
Our compact and lightweight designs meet SWaP (Size, Weight, and Power) criteria, delivering maximum efficiency for weight-restricted aircraft.
EMI/EMC performance has been tested according to MIL-STD-461 requirements and optimized for compatibility with avionics systems.
For high-altitude applications, special PCB layout designs are implemented to minimize leakage conductivity between components, addressing isolation risks caused by low pressure.
Thanks to advanced thermal management solutions, devices are effectively cooled even at low air densities.
These systems provide uninterrupted power to mission computers, sensors, E/O systems, data recording units, and communication infrastructures across a wide range of platforms—from unmanned aerial vehicles (UAVs) and fighter jets to helicopters and maritime patrol aircraft.
VERTE ELECTRONICS
Solid-State Power Distribution Units
When mission systems are activated on an air platform, a sequential security chain comes into operation. Avionics equipment, sensors, radars, mission computers, and communication systems—all sensitive to electrical noise—each require a stable and isolated power infrastructure.
SOLID-STATE POWER DISTRIBUTION UNITS
Our solid-state PDUs go beyond traditional relay-based distribution systems by offering contactless switching, high-speed response times, and predictive fault analysis capabilities. These units provide protection within microseconds against sudden load changes, short circuits, or overcurrent conditions encountered during flight, making them critically important for air platforms.
Solid State Power Distribution Unit
SSPDU-270D-14-140-CXX
SSPDU-270D-14-140-CXX is a high-voltage military SSPDU that distributes 100–400 VDC input across 14 channels. Equipped with Battle Mode, CAN/RS-485 interfaces,…
Type
SSPDU
Input Voltage
100–400 VDC
Number of Channels
14
Channel Current Value
14x10A
Total Output Current
140 A
Operating Temperature
-32°C ~ +50°C
Solid State Power Distribution Unit
SSPDU-270D-14-140-DXX
SSPDU-270D-14-140-DXX is a military-grade SSPDU solution that distributes high input voltages ranging from 100–400 VDC across 14 independent channels. It…
Type
SSPDU
Input Voltage
100–400 VDC
Number of Channels
14
Channel Current Value
14x10A
Total Output Current
140 A
Operating Temperature
-32°C ~ +50°C
Fully compatible with 115VAC/400Hz, 270 VDC, and 28VDC power systems, designed in accordance with MIL-STD-704 standards.
Thanks to its solid-state switching architecture, it contains no moving parts, operates silently, requires less maintenance, and offers a long service life.
Each output channel can be monitored and independently switched on or off via intelligent control circuits.
Faults such as overcurrent, short circuit, and open circuit are detected and reported in real time.
They can integrate with mission systems via CAN, RS-485, or Ethernet and can be configured through mission software when needed.
Thanks to its compact size and optimized thermal design, it delivers high-density power management in confined spaces within the airframe.
It complies with MIL-STD-461 standards for EMI/EMC and delivers reliable performance even in electronic warfare environments.
These systems are used across a wide range of platforms, including UAVs, helicopters, Airborne Early Warning and Control (AEW&C) aircraft, fighter jets, and air transport platforms. Our SSPDU architectures make a difference, especially in missions requiring high system density and low fault tolerance.
VERTE ELECTRONICS
Military Battery Charging Systems
Supporting mission systems not only with instantaneous power but also with redundant and portable energy solutions is fundamental to operational safety.
MILITARY BATTERY CHARGING SYSTEMS
Batteries used in pre-flight preparations, portable mission kits, or standalone systems need to be charged quickly, safely, and with longevity.
Military Battery Charging Unit
MSUPC-28-1680-A01
MSUPC-28-1680-A01 is a military-grade battery charger and power supply designed for 28V batteries, delivering up to 1680W of power. It…
Type
MSUPC
Input Voltage
90–264 VAC
Output Current
60 A
Output Power
1680 W
Mobile Military Charger
MILCHAR-1PH-4B14-200-A01
MILCHAR-1PH-4B14-200-A01 is a rugged, portable battery charging system designed in compliance with military standards. It features smart charging algorithms and…
Type
MSUPC
Input Voltage
80~264 VAC
Output Current
3 A
Output Power
200 W
Compatible with various battery chemistries such as Li-ion, LiFePO₄, AGM, NiMH, it features intelligent charging algorithms.
Provides multi-layer safety protection against conditions such as excessive temperature, reverse polarity, and short circuits.
During charging, cell balancing is actively monitored to maximize battery lifespan.
With enclosures providing IP65/IP67-level sealing, they can be safely used in hangars, airstrips, or field conditions.
With a wide DC input range (18–36VDC), it can be powered directly from the onboard energy infrastructure.
These solutions ensure that onboard portable systems, backup kits, and emergency batteries remain ready and available at all times during missions.
VERTE ELECTRONICS
AC and DC Uninterruptible Power Supply Units
In air platforms, power continuity is vital not only to keep systems operational but also for mission security and flight safety.
AC AND DC UNINTERRUPTIBLE POWER SUPPLY UNITS
Sudden power outages or fluctuations during flight can cause data loss in radar systems, communication breakdowns, and failures in mission computers. Therefore, our AC and DC uninterruptible power supply (UPS) units are designed to eliminate these risks.
DC Uninterruptible Power Supply
DUPS-28-MDC-300-A02
DUPS-28-MDC-300-A02 is an integrated-battery, multi-output, and auto-switching DC uninterruptible power supply (UPS). It provides 28V, 16V, and 12V outputs, instantly…
Type
DUPS
Input Voltage
28-36 VDC
Output Current
2 x 10 A,5 A,2.5 A
Output Power
60 W,80 W
Compatible with 115 VAC, 400 Hz, and 28 VDC power infrastructures, providing backup for both AC and DC.
Supports systems without interruption during power outages with a millisecond transfer time.
The integrated intelligent battery management system (BMS) continuously monitors battery health and charge status.
EMI/EMC compliance meets MIL-STD-461, and protection features fully comply with MIL-STD-704 standards.
Compact, lightweight, and easily integrated into platforms with fan-cooled or passive cooling options.
Integrated with mission computers, it enables remote monitoring and reporting.
These units ensure uninterrupted operation of mission systems even during critical moments, directly contributing to the overall mission success of the air platform.
